It is 500mm
Both the diameter and die head of small equipment such as VP35 are small, so it is incapable of producing large-size bricks
Usually 10,000 square meters is more suitable, the workshops are only part of the area, raw material storage and finished product storage areas must also be considered
The construction period is usually 6 months, with two technicians providing technical guidance and 20-50 labors
For the tunnel kiln, the length is 134 2m, and the size of kiln cart is 2 9*3 66*0 84m Coal feeding holes are arranged in the high-temperature section usually between 19th cart and 29th cart, about 24 columns Each column has 4 holes, total 96 holes or 4 or 5 holes staggered, total 108 holes
The smoke exhaust fan is used to discharge the combustion waste gas (flue gas) at the kiln head, centrifugal fans are generally used;
The medium transported by the fans is air and gas that is non-hypergolic, harmless to human and has no corrosion to steel materials, and the maximum temperature shall be less than 80 ° C;|
Structure: the centrifugal fan adopts volute type, Axial fan adopts cylinder type； Property: the centrifugal fan with the same impeller diameter has higher wind pressure and lower noise than the axial flow fan
Usually the gas exhaust fan, hot air blower, kiln tail recirculation fan, moisture exhaust fan , etc require frequency conversion control; And the gas exhaust fans, moisture exhaust fans, and hot air fans can be anti-corrosion based on the requirement;
As for the equipment foundation drawings from the material processing to shaping section only, will it be possible to provide construction drawings when client provide on-site footprint and location of plant and kiln dryer?
International Business：+86 181-8262-2677
Domestic Business：+86 156-1925-3978
Email address：info@brictec.com Website：www. brictec.com
Address：Room B501, R&D Building, ZTE Industrial Park, No. 10 Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China. 
Click on Map
Chinese
English
русский
España
