The length of the belt conveyor is subject to the climbing angle, generally less than 18° Taking the climbing, motor power consumption, site and other factors into consideration, the appropriate climbing Angle is 13-14° Angle belt can reach 40° with much higher cost
Kaolin is one kind of clay, so primary roller mill and fine roller mill are enough If you want to produce decorative bricks, you may consider adding equipment such as European plate grinding to increase the proportion of fine material
The vacuum can only work with approximate mud material Situation like mud accumulation and slower extruding process may be caused related to the mud press board and loosen extruder mixing paddles In addition, it is also necessary to check the mud plate (reversed or not), its speed (35RPM for mixing paddles of 35 double-stage extruder),
这类设备都有单独的控制柜，就近有急停箱，没有操作台。
It is difficult for solid bricks to meet this requirement, and the estimated perforation rate should be at 20% by weight Adding other materials such as pulp, straw can help to reduce the weight, but the finished brick will have a large number of holes
Generally, the length and width of the kiln are determined first based on the output, the length of the 3 6m tunnel kiln is 134 2m Next is the number of small drying holes, the length of the small drying hole is 65-74m, and the storage capacity at both ends is considered by 20m Finally, the process equipment is selected and arranged based on client’s requirement We will try to organize the layout as neatly as possible
International Business：+86 181-8262-2677
Domestic Business：+86 156-1925-3978
Email address：info@brictec.com Website：www. brictec.com
Address：Room B501, R&D Building, ZTE Industrial Park, No. 10 Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China. 
Click on Map
Chinese
English
русский
España
