he kiln control system is mainly composed of temperature detection and controlling The thermocouple is used to detect temperature and pressure and then control burning temperature by adjusting gas amount while burning The control adjustment of tunnel kiln...
The control system for kiln cart operating equipment is to set up a unified control console nearby to facilitate personnel operation, including hydraulic pusher, outlet pulling machine, return pulling machine, and ferry car
Sintering temperature and cycle are the inherent characteristics of raw materials, which are generally obtained through experiments, and the actual production parameters of nearby brick factories also have high reference value
We have no industry experience to change diesel motor on two stage vacuum extruder It’s like developing a new specialized equipment, the cost is high An simpler method is to install a generator set
The kiln cart size shall be determined based on the loading cart drawing; There is a modulus relationship between the length of kiln car and the pitch of coal feeding holes
The length of the belt conveyor is subject to the climbing angle, generally less than 18° Taking the climbing, motor power consumption, site and other factors into consideration, the appropriate climbing Angle is 13-14° Angle belt can reach 40° with much higher cost
Kaolin is one kind of clay, so primary roller mill and fine roller mill are enough If you want to produce decorative bricks, you may consider adding equipment such as European plate grinding to increase the proportion of fine material
The vacuum can only work with approximate mud material Situation like mud accumulation and slower extruding process may be caused related to the mud press board and loosen extruder mixing paddles In addition, it is also necessary to check the mud plate (reversed or not), its speed (35RPM for mixing paddles of 35 double-stage extruder),
这类设备都有单独的控制柜，就近有急停箱，没有操作台。
It is difficult for solid bricks to meet this requirement, and the estimated perforation rate should be at 20% by weight Adding other materials such as pulp, straw can help to reduce the weight, but the finished brick will have a large number of holes
International Business：+86 181-8262-2677
Domestic Business：+86 156-1925-3978
Email address：info@brictec.com Website：www. brictec.com
Address：Room B501, R&D Building, ZTE Industrial Park, No. 10 Tangyan South Road, High-tech Zone, Xi'an City, Shaanxi Province, China. 
Click on Map
Chinese
English
русский
España
